MODULE NUMBERS

MX

-

-

-

-

-

-

Step 1:

Model number always starts with MX

Step 2:

To designate a cage assembly enter the two character code from the system design chart. When ordering a power module or master module enter a "K". If ordering any other module enter an asterisk (*).

Step 3:

To designate the type of module enter the single character code from the system design chart. To designate cage assembly output voltage enter the single character code 1 for 120FAC, 3 for 230VAC or 4 for 240VAC.

Step 4:

To designate the input voltage enter the single character code from the VDC Input Voltage Chart below.  If ordering an alarm card or cage assembly enter an asterisk (*)

VDC INPUT VOLTAGE CHART

DC Volts

12

24

32

48

66

108

Designation

1

2

B

4

E

I

Step 5:

The output frequency is designated by using the first number of the frequency (5 for 50Hz, 6 for 60Hz, 4 for 400Hz). If ordering a X-fer switch, alarm card, power module or cage assembly, enter an asterisk (*)

Step 6:

This designates the revision level   (for MTI's  use only)

Step 7:

To designate option enter the code from the chart below.  If no option is required, please leave it blank

OPTION CHART

Option

Code

Conformal coating

M7