MTI TECHNOLOGIES introduces the truly redundant, modular inverter system. This is the most reliable inverter system available. No single malfunction will cause the inverter system to fail. For ease of maintenance, modules are "hot" insertable. Power levels are expandable, and inverter modules can be upgraded or replaced while the system is on line without interruption in power to your critical loads.

The system can be configured for power levels from 1000 Watts to 5KW with 120 VAC output. Larger systems are available with up to 20 KW at 120 Vac output and 40KW at 240 Vac bi-phase or 60KW at 208 Vac 3 phase, upon special order.

Eliminating control and alarm cards can create systems lower in cost, but are not redundant. One 1000-Watt master module and any number of additional 1000-Watt power modules (up to four), combine to make a standard inverter. This type of system can be expanded as power requirements increase.

The system is extremely compact and lightweight. The power modules only weigh 7 lbs. each.

The output voltage is precisely regulated, such that no measurable voltage change occurs on the output when the input voltage changes over its wide voltage range. Similarly, less than 0.5 volt change in output voltage will occur when the output load varies from 0 to 100% of rated power. With distortion of 2% maximum, this inverter offers the cleanest sine wave power available.

Models are available which cover all standard battery systems. Custom models can be designed to meet your specific input voltage requirements.